pig sty

pig sty installs Pigsty, prepares the controller, generates configuration, and runs deployment playbooks. It also manages dashboards through the Grafana HTTP API.

Quick Start

Run these commands on the controller:

pig sty init                     # download Pigsty
pig sty boot                     # prepare Ansible and the controller
pig sty conf -g                  # generate configuration with random passwords
pig inventory edit              # review target hosts and deployment settings
pig sty deploy                   # run the deployment

deploy starts the playbook immediately and changes the hosts selected by the inventory. See the Pigsty installation guide for the full procedure.

boot also attempts to initialize a missing ~/pigsty directory. Run init first to select a version or path. Use pig inventory to edit and validate an existing configuration.

sty init

Download and install the Pigsty distribution into ~/pigsty.

pig sty init                   # install latest version to ~/pigsty
pig sty init -f                # install and overwrite existing pigsty directory
pig sty init -m                # prefer the pigsty.cc mirror for downloads
pig sty init -p /tmp/pigsty    # install to selected directory /tmp/pigsty
pig sty init -v 4.5.0       # install this documented Pigsty version
pig sty init 4                 # install the latest release in the 4.x series

Options:

• -p|--path: target installation directory, default ~/pigsty
• -f|--force: force overwrite of existing pigsty directory
• -m|--mirror: prefer the pigsty.cc mirror
• -v|--version: Pigsty version
• -d|--dir: download directory, default /tmp
• --accept-eula: accept the Pigsty Pro EULA without an interactive prompt; applies to Pro releases

sty boot

Prepare Ansible and its Python dependencies, configure online or offline repositories, and check localhost SSH and the Pigsty directory.

pig sty boot                         # online bootstrap with the default region
pig sty boot -r china                # use China-region repositories
pig sty boot -m                      # equivalent to --region china
pig sty boot -k                      # preserve existing repository definitions
pig sty boot -p /path/to/pkg.tgz     # use an explicit offline package
pig sty boot -p https://host/pkg.tgz # download and use an offline package
pig sty boot -o json                 # machine-readable result and warnings

You may invoke the command without sudo. Pig resolves and downloads an explicit source first, then re-executes itself through sudo once when root access is required. Set PIG_NO_SUDO=1 to disable automatic elevation, or PIG_NON_INTERACTIVE=1 to make the sudo attempt non-interactive.

Bootstrap stages

1. On Debian 12/13, check and attempt to repair the en_US.UTF-8 locale.
2. Check that Ansible runs and that its Python environment provides yaml, jmespath, and either cryptography or OpenSSL.
3. Prepare the selected offline repository. If Ansible is unusable, install controller dependencies and check it again.
4. Check helper tools, prepare key-based SSH to 127.0.0.1 for the invoking administrator, and attempt to initialize a missing ~/pigsty.

PIG prepares a selected or discovered offline repository even when Ansible already works. Use this command to stage offline packages on a ready controller.

Source selection and modes

The result records one of four bootstrap modes:

PIG selects a source as follows:

• --path accepts a local archive or an HTTP(S) URL. URL credentials are rejected, and a bad explicit source is a hard error rather than an online fallback.
• An automatically discovered /tmp/pkg.tgz must be a regular, non-group/world-writable file owned by root or the invoking sudo user. Unsafe candidates are ignored with a warning.
• A complete /www/pigsty repository takes precedence over a selected package. If both exist, the existing repository is reused and the package is left untouched with a warning.
• Archives are downloaded and extracted by Pig itself. If /www does not exist, Pig creates /data/nginx and the expected /www -> /data/nginx symbolic link before committing content.

Offline mode enables only the strict pigsty-local repository. Online mode configures the selected region and installs the node and pigsty controller modules. It reuses or installs Pigsty’s embedded signing key and enables signature checks when key preparation succeeds. If implicit-key preparation fails, it records a warning and continues with the selected Pigsty repositories’ signature checks disabled. With explicit gpgkey or signed-by metadata, failure to prepare the referenced key is fatal; see pig repo.

Repository replacement and recovery

By default, PIG backs up existing definitions before writing new ones. If repository setup or package installation fails, it attempts to restore the backup and reports the result. --keep preserves existing definitions and allows a fallback to them if an online refresh fails.

Ansible installation or validation failure makes the command fail. Incomplete SSH, locale, or Pigsty-directory setup produces warnings.

Options:

• -r|--region: region, such as default, china, europe
• -m|--mirror: equivalent to --region china; mutually exclusive with --region
• -p|--path: offline package file or HTTP(S) URL; an invalid explicit source is a hard error
• -k|--keep: preserve existing repositories instead of replacing them

Structured output

-o json or -o yaml returns a pig.sty.boot/v2 result with Ansible state, mode, sources, repository recovery results, localhost SSH, Pigsty directory status, and warnings.

See Pigsty offline installation for the offline procedure.

sty conf

Generate an inventory from a template under <PIGSTY_HOME>/conf. The command edits the YAML configuration, validates the complete result, and writes the output atomically with mode 0600.

pig sty conf                         # use conf/meta.yml and write pigsty.yml
pig sty conf -g                      # generate random passwords (recommended)
pig sty conf rich                    # positional mode selects conf/rich.yml
pig sty conf -c ha/full              # equivalent flag form; do not combine both forms
pig sty conf ha/trio --ip 10.0.0.10,10.0.0.11,10.0.0.12
pig sty conf --domain infra.example.com
pig sty conf rich -v 18              # request PostgreSQL 18 for a generic template
pig sty conf -r china -s             # China region, placeholder IP, no admin preflight
pig sty conf -x                       # materialize proxy environment variables
pig sty conf ha/full -g -O ha.yml       # custom owner-only output file
pig sty conf -n --ip 10.0.0.10 -o json

The default mode is meta; pig sty c and pig sty configure are command aliases. Note that -O selects the Inventory output file, while the global lowercase -o selects text, JSON, or YAML command output.

Template and output paths

Template names are relative to <PIGSTY_HOME>/conf. The .yml suffix is optional; for example, use ha/full. Use a relative name without ...

Relative output paths resolve under <PIGSTY_HOME>. Absolute paths are also accepted. The output must be a different file from the template and cannot be a symlink. A parsing, transformation, or validation error leaves the existing output unchanged.

Structural mutations

The command applies these changes to the template:

An IP mapping that creates a duplicate key fails. PIG warns if a supplied address has no matching placeholder in the template.

For PostgreSQL 19 beta, Pig also enables the beta repository after pgsql when the template contains the expected repository list. Modes below conf/build/ intentionally bypass IP mapping and controller-admin preflight so build templates remain portable.

Active password identifiers are grafana_admin_password, pg_admin_password, pg_monitor_password, pg_replication_password, patroni_password, haproxy_admin_password, minio_secret_key, and etcd_root_password. Generation also covers the documented DBUser.Meta, DBUser.Viewer, S3User.Backup, S3User.Meta, S3User.Data, DBUser.Supa, and Vibe.Coding placeholders. Repeated occurrences of one identifier receive the same generated value.

Options:

• -c|--conf: template mode, equivalent to positional [mode]; the two forms are exclusive
• --ip: up to ten distinct comma-separated IPv4 addresses
• --domain: replace the exact i.pigsty placeholder with a valid DNS domain
• -v|--version: PostgreSQL major version, 18/17/16/15/14; 19 beta can be specified explicitly
• -r|--region: upstream repository region, such as default/china/europe
• -m|--mirror: equivalent to --region china; mutually exclusive with --region
• -O|--output-file: output config file path, default pigsty.yml
• -s|--skip: keep the placeholder IP and skip admin SSH/sudo preflight; exclusive with --ip
• -p|--port: SSH port
• -x|--proxy: write non-empty proxy environment variables into all.vars.proxy_env
• -n|--non-interactive: refuse ambiguous IP selection instead of prompting
• -g|--generate: replace known demo credentials with random 24-character values

Preflight and validation

PIG checks the operating system, package manager, controller resources, SSH, sudo, and Ansible. --port selects the SSH check port. --skip bypasses administrator SSH/sudo preflight and preserves placeholder IPs; other checks still run.

The output must pass inventory validation. If ansible-inventory is available, PIG also uses it to parse the result. Argument, template, and validation errors prevent writing. Issues that allow configuration to continue are reported as warnings.

Structured output

-o json or -o yaml returns pig.sty.configure/v1, including the template, output path, region, IPs, domain, SSH port, PostgreSQL versions, and warnings. Generated passwords are written only to the inventory; the result lists their identifiers.

See the Pigsty configuration guide for the procedure.

sty deploy

Deploy Pigsty with the deploy.yml playbook.

pig sty deploy       # run deploy.yml, falling back to install.yml if not found
pig sty d            # short alias
pig sty de           # short alias

This command runs the deploy.yml playbook from your Pigsty installation directory. For backward compatibility, if deploy.yml does not exist but install.yml exists, install.yml is used instead.

The playbook starts immediately, without a confirmation prompt. Review the selected inventory before running it.

sty list

List available Pigsty versions.

pig sty list                     # list recent versions
pig sty list all                 # list all available versions
pig sty list 4                   # list versions from 4.x onward

sty get

Download the Pigsty source tarball.

pig sty get                      # download latest version
pig sty get 4.5.0       # download the documented Pigsty version
pig sty get -m                   # prefer the pigsty.cc mirror

sty grafana

pig sty grafana (alias gf) manages dashboards through the HTTP API. The optional PATH selects a Grafana root directory, one direct subdirectory, or one dashboard JSON file. The default is <PIGSTY_HOME>/files/grafana.

pig sty grafana info             # check Grafana health, authentication, and basic info
pig sty grafana list             # list all dashboards in the active organization
pig sty grafana boot             # bootstrap Grafana around the existing pigsty dashboards
pig sty grafana init             # load the complete dashboard corpus, then bootstrap
pig sty grafana load [PATH]      # load dashboards selected by a local path
pig sty grafana dump [PATH]      # export remote dashboards into a local path
pig sty grafana clean [PATH]     # delete dashboards selected by a path (--dry-run/--yes)
pig sty grafana lang zh-Hans     # set the organization and current-user language
pig sty grafana style dark       # set the organization and current-user visual style

Select the operation scope

• list shows all dashboards in the current organization.
• load creates or updates dashboards by UID from local files and preserves other remote dashboards.
• boot renames the current organization to Pigsty, stars the existing pigsty dashboard, and makes it the organization and current-user home.
• init loads the complete dashboard root, then runs boot. Use load for a single folder or file.
• dump -d DIR exports to a chosen directory. --dir and positional PATH are mutually exclusive.
• clean PATH deletes remote dashboards declared by that local path. clean --all deletes every dashboard and folder in the current organization.
• style accepts dark, light, or auto.

Preview the deletion scope, then confirm it:

pig sty grafana clean --dry-run
pig sty grafana clean --yes

Connection and credentials:

Choose --password or --password-file; they are mutually exclusive. Without either option, PIG uses GRAFANA_PASSWORD, then all.vars.grafana_admin_password from the inventory. The HTTP client enforces timeouts and response-size limits, refuses redirects, and verifies TLS certificates by default.

Legacy dashboards and schema v2 resources

load and init accept both classic Grafana dashboard JSON and the resource form whose identity is exactly:

{"apiVersion":"dashboard.grafana.app/v2","kind":"Dashboard","metadata":{"name":"pgsql-overview","namespace":"default"},"spec":{}}

Each format uses its corresponding API:

• Classic JSON takes its UID from top-level uid and uses the legacy dashboard API.
• Schema v2 takes its UID from metadata.name, defaults a missing namespace to default, requires an object-valued spec, and uses Grafana’s dashboard resource API.
• The JSON filename (without .json) must match the resolved UID. Only one local folder layer is allowed; its directory name becomes the Grafana folder UID.
• For schema v2, PIG preserves spec and the grafana.app/message annotation, sets grafana.app/folder from the local folder, and deliberately removes server-managed metadata/status before upsert.
• dump preserves schema v2 only when the target file already exists locally in v2 form; it then fetches the native v2 resource using that file’s namespace. A new dump target defaults to classic JSON. Local-only files are never deleted by dump.

Other dashboard.grafana.app/* versions are unsupported. To preserve v2 format during export, keep the existing local v2 file.

Design records

• Native sty boot
• Native sty conf
• Native Grafana Management
• Use the CMDB Pigsty Already Has